Today's Groupon offers Foam Draft Strip-Window Door Insulation, distributed by Global Fulfillment Ltd.

• Blocks cold draughts through gaps 1 to 8 mm wide significantly reducing heat loss
• Easy application (self-adhesive / requires no glue or fixings)
• Easily compressed (low closing pressure). Suitable for large and variable gaps
• Profile Self Adhesive draught proofing strip
• Blocks cold draughts through gaps 1 to 8 mm wide significantly reducing heat loss
• Easy application (self-adhesive / requires no glue or fixings)
• Easily compressed (low closing pressure)
• Suitable for large and variable gaps

Fitting Instructions

• Cut to size, peel self-adhesive backing strip and apply door frame orwindow frame.
• Make sure all surfaces upon which the seal is to be fixed are clean, dry andfree from dirt, dust, grease and flaking paint. If necessary, rub down surfaces with white spirit and dry off thoroughly.
• Take a single section of seal and peel off about 15cm/6'' of backing paper to expose the adhesive.
• Press the seal against the door or window frame, working from the top downwards and peeling off the backing paper * Position the seal on the frame so it will be compressed when the door or window closes.
• Cut to exact length with scissors.
• Repeat this operation for the other vertical side(s) and horizontalsection(s)
• Size of Foam: 2X 5M X 9mm X 5mm.
• Material: EPDM foam rubber+Mesh Gum/3M Adhesive